Connecting the unit
6.2.4 Connecting the potential equalization
INFORMATION
6.3 Connecting the kitchen guiding system
DANGER
32
Image: Connecting the potential equalization
Perform this procedure separately for each unit.
1. Route and connect the potential equalization line to the marked
connection.
2. Fill out the Start-up operation report.
The units can be connected to a kitchen guiding system using an RJ45
plug.
Risk of personal injury and property damage from electric shock
• Prior to working on the FlexiCombi Team, ensure that the two electrical
circuits inside the unit are de-energized.
• Do not operate the unit with the housing open.
Minimum requirements for the network cable
Type of network
Cable quality
Connection to unit
Installation instructions
Ethernet
4-pair shrouded patch cable
Cat-6 S/FTP
Shrouded RJ45 connector