Table of Contents
Advertisement
5.2 Lifting the unit off the pallet
CAUTION
NOTICE
A
B
All dimensions in mm (in)
* Depends on the kitchen ventilation system and quality of ceiling material
** For service work 500 mm (19,69 in) recommended
The following clearances from walls, ceilings or other equipment must
be maintained when installing the unit:
•
Left, right and behind: at least 50 mm.
•
For service work, 500 mm at left recommended.
•
Clearance to heat sources (baking ovens), 500 mm at left.
•
Clearance to deep-fat fryers, at least one length of the hand shower
at left and right.
Risk of property damage and personnel injury from tipping unit
• Stay clear of lifted unit.
• Move lifted unit carefully.
Risk of property damage from lifting the unit incorrectly
• Place the forks of the pallet truck next to the siphon.
Additional support at the rear side of the unit is required to lift it safely.
Requirement for additional support for the unit
•
Square metal profile at least 40 x 40 x 2 mm.
•
Alternatively, a piece of timber of 40 x 40 mm can be used.
Image: Lifting the unit off the pallet
Installation instructions
Installing the unit
C *
D **
19
Advertisement
Table of Contents
