WAGO 750 XTR Series System Manual page 68

Appendix
• CiA
tional Users and Manufacturers Group e.V.
• CODESYS is a registered trademark of CODESYS Development GmbH.
• DALI is a registered trademark of the Digital Illumination Interface Alliance (DiiA).
• EtherCAT
Automation GmbH, Germany.
• ETHERNET/IP™ is a registered trademark of the Open DeviceNet Vendor Association,
Inc (ODVA).
• EnOcean
• Google Play
• IO-Link is a registered trademark of PROFIBUS Nutzerorganisation e.V.
• KNX
• Linux
• LON
• Modbus
zation, Inc.
• OPC UA is a registered trademark of the OPC Foundation.
• PROFIBUS
(PNO).
• PROFINET
(PNO).
• QR Code is a registered trademark of DENSO WAVE INCORPORATED.
• Subversion
• Windows
68 System manual | Version: 2.0.0
® ®
and CANopen are registered trademarks of CAN in AUTOMATION – Interna-
®
is a registered trademark and patented technology licensed by Beckhoff
®
is a registered trademark of EnOcean GmbH.
TM
is a registered trademark of Google Inc.
®
is a registered trademark of the KNX Association cvba.
®
is a registered trademark of Linus Torvalds.
®
is a registered trademark of the Echelon Corporation.
®
is a registered trademark of Schneider Electric, licensed for Modbus Organi-
®
is a registered trademark of the PROFIBUS Nutzerorganisation e.V.
®
is a registered trademark of the PROFIBUS Nutzerorganisation e.V.
®
is a trademark of the Apache Software Foundation.
®
is a registered trademark of Microsoft Corporation.
750 XTR Series