Indirect Safety - WAGO 750 XTR Series System Manual

Safety
• Use conductors with cross-sections that are designed for the maximum load current.

2.5 Indirect Safety

• Do not use any contact spray for cleaning.
• Clean product housings and soiled contacts with propanol.
• The products are not resistant to materials having seeping and insulating properties
such as aerosols, silicones and triglycerides (found in some hand creams). If these
substances occur in the environment of the products, install the products in an addi-
tional housing that is also resistant to these substances.
• Replace any defective or damaged devices.
• Do not place products on the data or power jumper contacts.
• If product fails, communication to downstream products may be interrupted.
• Products from the WAGO I/O System 750/753 can be operated in combination with
those of the WAGO I/O System 750 XTR. Note the special power supply requirements!
Such mixed operation does not change the maximum permissible ambient conditions
of the individual products.
• Operate ETHERNET and PROFINET interfaces in separate networks.
• Observe possible different technical specifications for mounting that does not corre-
spond to the specified mounting position.
• Only use accessories authorized by WAGO.
12 System manual | Version: 2.0.0
750 XTR Series