Power-On Delay Setting - Nexcom nROK 1020 Series User Manual

Appendix E: Vehicle Power Management Setup
Set the startup voltage to 12.5V or 25V and the shutdown volt-
age to 11.0V or 22V
If the input voltage is 12V: the startup voltage to 12.5V and the shutdown
voltage to 11.5V.
If the input voltage is 24V: the startup voltage to 25V and the shutdown
voltage to 23V.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
Power Management Configuration
** Startup & Shutdown Voltage Setting **
Input Voltage
Startup,Shutdown
** Delay Time Setting **
Power On Delay
Power Off Delay
(11.5, 10.5) / (23,21)
(12.0, 11.0) / (24,22)
(12.5, 11.0) / (25,22)
(12.5, 11.5) / (25,23)
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Startup,Shutdown Setting
12 V
[(11.5,10.5)/(23,21)]
[Disabled]
[Disabled]
Startup,Shutdown
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Power-on Delay Setting

Disable Power-on Delay
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
Power Management Configuration
** Startup & Shutdown Voltage Setting **
Input Voltage
Startup,Shutdown
** Delay Time Setting **
Power On Delay
Power Off Delay
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
64
Power On Delay Setting
12 V
[(11.5,10.5)/(23,21)]
[Disabled]
[Disabled]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
VTC 1020 and nROK 1020 Series User Manual