Nexcom NIFE 200 User Manual
  1. Manuals
  2. Brands
  3. Nexcom Manuals
  4. Industrial PC
  5. NIFE 200
  6. User manual

Nexcom NIFE 200 User Manual

Nife 200 series pc-based factory automation system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NEXCOM International Co., Ltd.
IoT Automation Solutions Business Group
PC-based Factory Automation System
NIFE 200 Series
User Manual
NEXCOM International Co., Ltd.
Published January 2018
www.nexcom.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NIFE 200 and is the answer not in the manual?

Questions and answers

Related Manuals for Nexcom NIFE 200

Summary of Contents for Nexcom NIFE 200

  • Page 1 NEXCOM International Co., Ltd. IoT Automation Solutions Business Group PC-based Factory Automation System NIFE 200 Series User Manual NEXCOM International Co., Ltd. www.nexcom.com Published January 2018...

  • Page 2: Table Of Contents

    SATA Connector ................17 Front View ...................4 SATA Power Connector ..............17 Top View .....................5 Internal USB Dongle Connector ............18 Mechanical Dimensions ................6 SD Card Slot ..................18 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 3 Removing the Side Cover ..............45 Installing a PCI or PCIe Card ..............47 Chapter 4: BIOS Setup About BIOS Setup .................53 When to Configure the BIOS ..............53 Default Configuration ................54 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 4: Preface

    No describes how to keep the system CE compliant. part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written consent from NEXCOM Declaration of Conformity International Co., Ltd.

  • Page 5: Rohs Compliance

    (Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force to implement the introduction of green products.

  • Page 6: Warranty And Rma

    (manuals, cable, etc.) and any components from the card, such as CPU and RAM. If the components were suspected as part of the problems, ▪ If RMA goods can not be repaired, NEXCOM will return it to the customer please note clearly which components are included. Otherwise, NEXCOM without any charge.
  • Page 7 ESD workstation. If no such station is available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 8: Safety Information

    There is a danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. viii Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 9: Safety Precautions

    18. This product is intended to be supplied by a Listed Power Adapter, suitable for use at Tma 55 degree C whose output meets SELV and rating is 24Vdc, 2.5A min. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 10: Technical Support And Assistance

    Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEXCOM’s Warning: website at www.nexcom.com. Information about certain situations, which if not observed, can cause personal injury. This will prevent injury to yourself 2.

  • Page 11: Global Service Contact Information

    ZhongHe District, Beijing, 100094, China New Taipei City, 23586, Taiwan, R.O.C. Tel: +86-10-5704-2680 Tel: +886-2-8226-7796 Fax: +86-10-5704-2681 Fax: +886-2-8226-7792 Email: sales@nexcom.cn Email: sales@nexcom.com.tw www.nexcom.cn www.nexcom.com.tw Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 12 Hui Yin Ming Zun Building Room 1108, Building No. 11, 599 Yunling Road, Putuo District, Shanghai, 200062, China Tel: +86-21-6125-8282 Fax: +86-21-6125-8281 Email: frankyang@nexcom.cn www.nexcom.cn Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 13: Package Contents

    KRAMER 602DCD1049X00 (E)NIFE 200 DVD Driver VER:1.0 7800000078X00 DVI-I to VGA Adapter for NISE 104 ST:ADDH27B DVI-I (24+5) Pin Male to VGA 15-pin Female xiii Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 14: Ordering Information

    NIFE 200P2 (P/N: 10J70020001X0) Intel Atom™ processor J1900 Quad Core 2.0GHz fanless system ® 24V, 60W AC/DC power adapter w/ o power cord (P/N: 7400060024X00) Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 15: Chapter 1: Product Introduction

    I210AT GbE LAN ports support WoL, Teaming and PXE ® ▪ Typical 24V DC input with +/-20% range ▪ 3x USB 2.0 & 1x USB 3.0 ▪ 2x RS232/422/485 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 16: Hardware Specifications

    ▪ ATX power on/off switch Dimensions ▪ LEDs for HDD LED, Battery LEDs, Power LED, COM port TX/RX, 5x ▪ NIFE 200: 85mm (W) x 157mm (D) x 214mm (H) programmable GPO LEDs ▪ NIFE 200P2: 151mm (W) x 157mm (D) x 230mm (H) ▪...
  • Page 17 ▪ Windows 8, 32-bit/64-bit ▪ Windows Embedded Standard 8, 32-bit/64-bit ▪ Windows 7, 32-bit/64-bit ▪ Windows Embedded Standard 7, 32-bit/64-bit ▪ Linux Kernel version 3.8.0 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 18: Knowing Your Nife 200/200P2

    Ports Power Button Power Press to power-on or power-off the system. Button 24V DC Input 24V DC Input Used to plug a DC power cord. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 19: Top View

    Top View PCI Expansions Two PCI expansion slots for add-on cards. NIFE 200P2 has the same top panel connectors as NIFE 200, with two additional PCI expansions. Remote On/Off Switch Used to connect a remote to power on/off the system.

  • Page 20: Mechanical Dimensions

    Chapter 1: Product Introduction Mechanical Dimensions NIFE 200 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 21: Nife 200P2

    Chapter 1: Product Introduction NIFE 200P2 Ø 4.20 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 22: Chapter 2: Jumpers And Connectors

    Static electricity can damage many of the electronic ▪ Use correct screws and do not over tighten screws. components. Humid environments tend to have less static electricity than Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 23: Jumper Settings

    (on) and open (off). Two-Pin Jumpers: Open (Left) and Short (Right) Three-Pin Jumpers: Pins 1 and 2 are Short Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 24: Locations Of The Jumpers And Connectors For Nifb 200

    Locations of the Jumpers and Connectors for NIFB 200 The figure below is the top view of the NIFB 200 main board which is the main board used in NIFE 200 series. It shows the locations of the jumpers and connectors.

  • Page 25: Jumpers

    Connector type: 1x3 3-pin header, 2.0mm pitch Connector type: 1x3 3-pin header, 2.0mm pitch Connector location: JP3 Connector location: JP12 Definition Definition 3VSB AT/ATX_SEL RTC_TEST# ATXBT_R Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 26: Connector Pin Definitions

    DVI1_DATA1_N_C DVI1_DATA1_P_C DP_DATA2_N_C DP_DATA3_P_C DP_DATA3_N_C DVI1_PWR DPC_CONFIG1 DPC_CONFIG2 DVI1_HPD DPC_AUXP_C DVI1_DATA0_N_C DVI1_DATA0_P_C DPC_AUXN_C DP_HPD_R DDC_CLK_VGA_C N21809347 HDMI_PWR DDC_DATA_VGA_C DVI1_CLK_P_C DVI1_CLK_N_C RED_VGA GREEN_VGA BLUE_VGA HSYNC_VGA VGADET Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 27: Lan1 And Usb 3.0/Usb 2.0 Ports

    Definition Definition P5V_OC01_C USB_0N_C V1P5_LAN2 LAN2_MDI0P USB_0P_C LAN2_MDI0N LAN2_MDI1P USB3_RX0_N_C USB3_RX0_P_C LAN2_MDI1N LAN2_MDI2P USB3_TX0_N_C LAN2_MDI2N LAN2_MDI3P USB3_TX0_P_C P5V_OC01_C LAN2_MDI3N HUBUSB_DN4_C HUBUSB_DP4_C LAN2_ACT_CON LAN2_LED_ACT# LAN2_100#_CON LAN2_LINK1G# Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 28: Lan2 And Usb 2.0 Ports

    10Mbps or no link Definition Definition Definition Definition USB_OC12 DN1_C V1P5_LAN LAN1_MDI0P DP1_C LAN1_MDI0N LAN1_MDI1P USB_OC12 DN2_C LAN1_MDI1N LAN1_MDI2P DP2_C LAN1_MDI2N LAN1_MDI3P LAN1_MDI3N LAN1_LINK1G# LAN1_100#_CON LAN1_LED_ACT# LAN1_ACT_CON Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 29: Com 1 Port (Rs232/422/485)

    SP2_RTS- SP1_RTS SP1_RTS+ SP2_RTS SP2_RTS+ SP1_CTS SP1_CTS+ SP2_CTS SP2_CTS+ SP1_RI SP1_CTS- SP2_RI SP2_CTS- REAR_GND REAR_GND REAR_GND REAR_GND REAR_GND REAR_GND REAR_GND REAR_GND REAR_GND REAR_GND REAR_GND REAR_GND Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 30: Dc Power Input

    GPIO2_LED GPO_PR2 LED1 H3_GND GPIO1_LED GPO_PR1 GPIO0_LED GPO_PR0 COM2_RXLEDN COM2_RXLEDP COM2_TXLEDN COM2_TXLEDP LED2 COM1_RXLEDN COM1_RXLEDP COM1_TXLEDN COM1_TXLEDP GPIO4_LED GPO_PR4 BAT_LED_N LED3 HDD_LED_PWR HDD_LED_N POWER_LED_PWR PWR_LED_N Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 31: Internal Connectors

    Connector type: Standard Serial ATA 7P (1.27mm, SATA-M-180) Connector type: 1x4 4-pin header, 2.0mm pitch Connector location: SATA1 Connector location: J1 Definition Definition Definition S_TXP1 VCC12 S_TXN1 S_RXN1 S_RXP1 VCC5 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 32: Internal Usb Dongle Connector

    SD Card Slot Connector type: USB port Connector location: CN4 Connector location: CN1 Definition Definition Definition USB_OC3 SD_D3 SD_CMD DN3_C DP3_C SD_CLK SD_D0 SD_D1 SD_D2 SD_WP SD_DET Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 33: Debug Card Connector

    Connector type: 1x4 4-pin header, 2.0mm pitch Connector location: J4 Connector location: JP4 Definition Definition Definition FRONT_LCI PLTRST_3P3# LPC_CLK0_DEBUG LPC_FRAME# AGND EXLINEOUT_JD LPC_AD3 LPC_AD2 LPC_AD1 LPC_AD0 FRONT_RCI VCC3 VCC3 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 34: Power Connector

    Connector type: 1x2 2-pin header, 3.96mm pitch Connector type: 2x4 8-pin header, 1.27mm pitch Connector location: JP2 Connector location: JP6 Definition Definition Definition VCC12 5VSB 5VSB KDAT_R MDAT_R KCLK_R MCLK_R Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 35: Remote Push Button Connector

    Connector type: 1x3 3-pin terminal block, 3.81mm pitch Connector type: 1x2 2-pin header, 2.0mm pitch Connector location: JP5 Connector location: JP1 Definition Definition PBT_TR PM_RESET#_J 3VSB Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 36: Battery Connector

    Connector type: 1x10 10-pin header JST, 1.0mm pitch Connector location: BAT1 Connector location: J2 Definition Definition Definition SP3_DCD SP3_RXD VBAT SP3_TXD SP3_DTR SP3_DSR SP3_RTS SP3_CTS SP3_RI VCC5 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 37: Internal Com4 Connector

    Connector location: JP8 Definition Definition Definition Definition VCC5 SP4_DCD SP4_RXD SP4_TXD SP4_DTR ICH_GPO0_OUT ICH_GPI0_IN ICH_GPO1_OUT ICH_GPI1_IN SP4_DSR SP4_RTS SP4_CTS ICH_GPO2_OUT ICH_GPI2_IN ICH_GPO3_OUT ICH_GPI3_IN SP4_RI VCC12 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 38: Mini-Pcie Connector

    Definition PCIE_WAKE# 3VSB_MINI2 SMB_CLK_CON PCIE_TXN2 SMB_DATA_CON PCIE_CLKREQ2# UIM_PWR PCIE_TXP2 UIM_DATA MINI2USBN PCIE_CLKN2 UIM_CLK MINI2USBP PCIE_CLKP2 UIM_RESET 3VSB_MINI2 UIM_VCCP 3VSB_MINI2 MINICARD2DIS# PLTRST_3P3#_CON PCIE_RN2 3VSB_MINI2 PCIE_RP2 3VSB Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 39: Mini-Pcie Connector

    Connector location: CN2 Definition Definition Definition Definition PCIE_WAKE# 3VSB_MINI1 1V5_1 SMB_CLK_CON PCIE_mSATA_TXN_R SMB_DATA_CON PCIE_CLKREQ3# PCIE_mSATA_TXP_R HUB_CLKN3_R HUB_CLKP3_R 3VSB_MINI1 3VSB_MINI1 MINICARD1DIS# PLTRST_3P3#_CON 1V5_1 PCIE_mSATA_RXP_R 3VSB_MINI1 PCIE_mSATA_RXN_R 3VSB_MINI1 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 40: Chapter 3: System Setup

    1. Place the NIFE 200P2 system on a flat surface to prepare for installation. 2. Locate the four screws on the side of the chassis. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 41 Chapter 3: System Setup 3. Remove the four screws and gently lift up the side cover. 4. Locate the memory module sockets. Memory sockets Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 42 Chapter 3: System Setup 5. Insert the memory module into the socket. 6. Ensure the memory module is secured properly into the socket. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 43: Installing A 2.5" Sata Hdd

    1. Locate the HDD drive bay cover on the front panel. 2. Remove the screws on the HDD drive bay cover. HDD drive bay cover Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 44 Chapter 3: System Setup 3. Pull out the HDD bracket by pulling the tape. 4. Install the 2.5” HDD into the bracket and secure it with screws. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 45 Chapter 3: System Setup 5. Place the HDD bracket back to its original location. 6. Secure the HDD drive bay cover with screws. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 46: Installing A Mini-Pcie Module (Half-Size)

    Chapter 3: System Setup Installing a Mini-PCIe Module (Half-Size) 2. Remove the mini-PCIe bracket from the board. 1. Locate the mini-PCIe slot on the board. Mini-PCIe slot Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 47 4. Insert the mini-PCIe module into the mini-PCIe slot at a 45 degree angle until the gold-plated connector on the edge of the module completely disappears into the slot. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 48 Chapter 3: System Setup 5. Push the module down and secure it with screws. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 49: Installing A Mini-Pcie Module (Full-Size)

    2-1. Insert the mini-PCIe module into the mini-PCIe slot at a 45 degree angle until the gold-plated connector on the edge of the module completely disappears into the slot. Mini-PCIe slot Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 50 Chapter 3: System Setup 2-2. Secure the module with screws. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 51: Installing A Sd Card Or Sim Card

    1. Locate the SIM/SD card cover on the top of NIFE 200P2 and loosen the 2. Remove the cover. screws on the cover. SIM/SD card cover Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 52 Chapter 3: System Setup 3. Insert the SD card into the SD card socket. 4. Ensure the SD card is correctly secured in position. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 53: Sim Card Installation Instructions

    5. Press down the SD card until it is fixed into the socket. 6. Locate the SIM Card socket on the top of NIFE 200P2 and press the yellow button gently to retrieve the SIM card holder. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 54 Chapter 3: System Setup 7. Place the SIM card into the holder. 8. Insert the SIM card holder back to its original position. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 55: Installing An Antenna Or Audio Cable

    2. Remove the antenna hole cover located on the top of NIFE 200P2. (2x Antenna Holes, 1x Audio Cable Hole) Antenna holes Audio cable hole Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 56 4. Insert the antenna jack through the antenna hole, and then install ring 1 and ring 2 onto the antenna jack. Ring 2 Ring 1 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 57: Audio Cable Installation Instructions

    Audio Cable Installation Instructions 5. Attach the antenna cable end onto the 3G or Wi-Fi mini-PCIe module. 6. Seperate ring 3 from the audio cable. Ring 3 Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 58 8. Attach the audio cable end to the JP4 connector, which is the audio pin 3 onto the audio jack. header for the NIFE 200 series. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 59: Removing The Side Cover

    1. Remove the screw circled below, located on the top of NIFE 200P2. 2. Remove the screw circled below, located on the bottom of NIFE 200P2. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 60 Chapter 3: System Setup 3. Locate the two screws on the side cover of NIFE 200P2. 4. Remove the screws and gently lift up the side cover. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 61: Installing A Pci Or Pcie Card

    These steps only apply to NIFE 200P2 and NIFE 200P2E 1. Locate and remove the screw on the PCI bracket cover. 2. Lift up the bracket cover and remove the PCI bracket. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 62 Chapter 3: System Setup 3. Install the PCI or PCIe card into the slot. 4. Remove the PCI card holder kit. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 63 5. Secure the screw to the PCI bracket to fix the PCI or PCIe card. 6. Install the plastic screw into the PCI holder kit. Plastic screw Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 64 7. Install the plastic nut into the PCI holder kit. 8. Secure the PCI holder kit with screws to fix the PCI or PCIe card. Plastic nut Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 65 (Check if the plastic screw is fixed correctly to the edge of the PCI or PCIe card. There should be three positioning dots on each side.) Positioning dots Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 66 Chapter 3: System Setup 11. Please do a final check to ensure that the PCI or PCIe card is firmly in place and not installed crooked. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 67: Chapter 4: Bios Setup

    This chapter describes how to use the BIOS setup program for the NIFE 200 The settings made in the setup program affect how the computer performs. series. The BIOS screens provided in this chapter are for reference only and It is important, therefore, first to try to understand all the setup options, and may change if the BIOS is updated in the future.

  • Page 68: Default Configuration

    Setup. Load optimized default values. Press the key to enter Setup: Saves and exits the Setup program. Press <Enter> to enter the highlighted sub-menu Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 69 When “” appears on the left of a particular field, it indicates that a submenu which contains additional options are available for that field. To display the submenu, move the highlight to that field and press Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 70: Bios Setup Utility

    [Thu 11/26/2015] F2: Previous Values System Time [13:15:49] F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 71: Advanced

    Select the highest ACPI sleep state the system will enter when the suspend Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc. button is pressed. The options are Suspend Disabled and S3 (Suspend to RAM). Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 72 Displays the Super I/O chip used on the board. Onboard Serial Port Mode Select this to change the serial port mode to RS232, RS422, RS485 or RS485 Auto. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 73 CPU Temperature Detects and displays the current CPU temperature. System Temperature Detects and displays the current system temperature. Fan Speed Detects and displays the fan speed. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 74 Windows, this problem may occur. To avoid this problem, enable this field to limit the return value to 3 or lesser than 3. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 75 F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc. EIST Enables or disables Intel ® SpeedStep. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 76 Enables or disables SATA port 0 and SATA port 1. SATA Port0 Hotplug and SATA Port1 Hotplug Enables or disables hotplug support on SATA port 0 and SATA port 1. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 77 Enables or disables onboard LAN PXE ROM. DDR50 Support for SDCard Storage Enables or disables DDR50 support for SD card. Controls the execution of UEFI and legacy storage OpROM. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 78: Chipset

    This is a workaround for OSs that does not support XHCI hand-off and EHCI Hand-off. The XHCI and EHCI ownership change should be claimed by the XHCI and EHCI driver respectively. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...
  • Page 79 Enables or disables PCH USB rate matching hubs mode. Azalia HDMI Codec USB EHCI Debug Enables or disables internal HDMI codec for Azalia. Enables or disables PCH EHCI debug capability. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 80: Security

    Enables or disables the PCI Express ports 0 to 3 on the chipset. Select this to reconfigure the administrator’s password. User Password Select this to reconfigure the user’s password. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 81: Boot

    Adjust the boot sequence of the system. Boot Option #1 is the first boot dialog box will appear. Confirm by selecting Yes. device that the system will boot from, next will be #2 and so forth. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 82: Appendix A: Power Consumption

    3. Measure the power consumption and record it. 4. Run Burn-in test program to apply 100% full loading. 5. Measure the power consumption and record it. Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 83: Appendix B: Gpi/O Programming Guide

    GPI/O (General Purpose Input/Output) pins are provided for custom system design. This appendix provides definitions and its default setting for the ten GPI/O pins in the NIFE 200 series. The pin definition is shown in the following table: PowerOn...
  • Page 84 #define GPO1_LO outportb(0xA02, 0x00) #define GPO2_HI outportb(0xA07, GPO2) #define GPO2_LO outportb(0xA07, 0x00) #define GPO3_HI outportb(0xA07, GPO3) #define GPO3_LO outportb(0xA07, 0x00) void main(void) GPO0_HI; GPO1_LO; GPO2_HI; GPO3_LO; Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 85: Appendix C: Watchdog Timer Setting

    0x90); # Use the second # Use the minute, change value to 0x10 # Set WDT sec/min outportb(SUPERIO_PORT, WDT_VALUE); outportb(SUPERIO_PORT+1, 0x05); #Set 5 seconds Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200 Series User Manual...

  • Page 86: Appendix D: Led Programming Guide

    L PPendIx roGrammInG uIde LEDs are provided for custom system design. This appendix provides definitions and its default setting for the LEDs in the NIFE 200 series. The LED definition is shown in the following table: PowerOn Address Default...

This manual is also suitable for:

Nife 200p2

Table of Contents