Config1 - Nexcom nROK 1020 Series User Manual

Appendix A: Software Demo Utility for I/O Ports of Function Control

1. Config1

1.1 System Info
MCU Version: Shows the MCU Version.
Ignition: Shows the signal of ignition.
ON: Signal of ignition is high.
OFF: Signal of ignition is low.
Input Voltage: Shows the voltage level of power-in.
Frequency-In: Shows the frequency of speed pulse signal.
1.2 WWAN
Enables or disables the WWAN function on CN10 Mini-PCIe socket.
Enables or disables the WWAN wakeup function on CN10 Mini-PCIe socket.
The setting can also be cleared by the Set button.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
1.3 Wi-Fi
Enables or disables the Wi-Fi module function on CN9 Mini-PCIe socket.
The setting can also be cleared by the Set button.
1.4 CANbus/SAE J1939
Selects CAN Bus or SAE J1939 function. CAN Bus is default setting. If SAE
J1939 is supported (BOM option), SAE J1939 has to be selected.
1.5 WDT
Enables or disables the WDT function. There are several selections of time.
The timer of WDT can also be cleared by the Set WDT Timeout button.
47
VTC 1020 and nROK 1020 Series User Manual