Subscribe to Our Youtube Channel
Related Manuals for Nexcom NIFE 200S
Summary of Contents for Nexcom NIFE 200S
- Page 1 NEXCOM International Co., Ltd. IoT Automation Solutions Business Group PC-based Factory Automation System NIFE 200S User Manual NEXCOM International Co., Ltd. www.nexcom.com Published October 2023...
-
Page 2: Table Of Contents
Mini-PCIe Connector ..............17 Knowing Your NIFE 200/200P2 ...............4 SD Card Slot ..................18 Front View ...................4 SATA Power Connector ..............18 NIFE 200S Mechanical Dimensions ............5 Internal COM3 Connector ..............19 Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... - Page 3 Default Configuration ................54 Entering Setup ..................54 Legends ....................54 BIOS Setup Utility ..................56 Main ....................56 Advanced ..................57 Chipset ....................64 Security .....................66 Boot ....................67 Save & Exit ..................67 Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
-
Page 4: Preface
No describes how to keep the system CE compliant. part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written consent from NEXCOM Declaration of Conformity International Co., Ltd. -
Page 5: Rohs Compliance
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force to implement the introduction of green products. -
Page 6: Warranty And Rma
“NEXCOM RMA Service Form” for the RMA number apply process. ▪ If RMA goods can not be repaired, NEXCOM will return it to the customer without any charge. ▪ Customers can send back the faulty products with or without accessories (manuals, cable, etc.) and any components from the card, such as CPU... - Page 7 ESD workstation. If no such station is available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
-
Page 8: Safety Information
There is a danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. viii Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 9: Safety Precautions
18. This product is intended to be supplied by a Listed Power Adapter, suitable for use at Tma 55 degree C whose output meets SELV and rating is 24Vdc, 2.5A min. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 10: Technical Support And Assistance
Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEXCOM’s Warning: website at www.nexcom.com. Information about certain situations, which if not observed, can cause personal injury. This will prevent injury to yourself 2. -
Page 11: Global Service Contact Information
Tel: +886-2-8226-7786 Tel: +886-2-8976-3077 Beitun District, Fax: +886-2-8226-7782 Email: sales@diviotec.com Taichung City, 406, Taiwan, R.O.C. Email: services@tmrtek.com www.diviotec.com Tel: +886-4-2249-1179 www.tmrtek.com Fax: +886-4-2249-1172 Email: jacobhuang@nexaiot.com www.nexaiot.com Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... - Page 12 9F, Tamachi Hara Bldg., LongGang District, 4-11-5, Shiba Minato-ku, ShenZhen, 518112, China Tokyo, 108-0014, Japan Tel: +86-755-8364-7768 Tel: +81-3-5419-7830 Fax: +86-755-8364-7738 Fax: +81-3-5419-7832 Email: steveyang@nexcom.com.tw Email: sales@nexcom-jp.com www.nexcom.cn www.nexcom-jp.com Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
-
Page 13: Package Contents
DVI-I TO VGA ADAPTER FOR NISE104 ST:ADDH27B DVI-I (24+5)PIN MALE TO VGA 15PIN FEMALE 4NCPF00316X00 TERMINAL BLOCKS 3P PHOENIX CONTACT:1834916 5.08mm FEMALE 180D DIP GREEN xiii Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 14: Ordering Information
• NIFE200S (P/N: 10J70020004X0) Intel ® Celeron ® J1900 Quad Core 2.0GHz Slim Fanless System • 24V, 60W AC/DC power adapter w/o power cord P/N: 7400060054X00 Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 15: Chapter 1: Product Introduction
▪ 2 x RS232/422/485 with 2.5KV isolation protection ▪ 2 x mini-PCIe socket for optional wireless modules ▪ Support -10°C to 60°C operating temperature ▪ Typical 24V DC input Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 16: Hardware Specifications
▪ 1 x 3-pin DC input, typical 24V DC input with ±20% range – Sinusoidal: 2Grms @ 5~500Hz, IEC60068-2-64 Storage Device ▪ 1 x Internal SD card (data storage only) ▪ 1 x miniPCIe for mSATA use Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... - Page 17 ▪ FCC Class A ▪ LVD Support OS ▪ Windows 7, 32-bit/64-bit ▪ Windows Embedded Standard 7, 32-bit/64-bit ▪ Linux Kernel version 3.8.0 ▪ Windows 10 IoT Enterprise, 64-bit Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
-
Page 18: Knowing Your Nife 200/200P2
Two DB9 ports used to connect RS232/422/485 compatible devices. Power Button Press to power-on or power-off the system. 24V DC Input Used to plug a DC power cord. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 19: Nife 200S Mechanical Dimensions
Chapter 1: Product Introduction NIFE 200S Mechanical Dimensions 50.00 40.00 4.20 157.00 4.20 Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 20: Chapter 2: Jumpers And Connectors
Static electricity can damage many of the electronic ▪ Use correct screws and do not over tighten screws. components. Humid environments tend to have less static electricity than Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 21: Jumper Settings
(on) and open (off). Two-Pin Jumpers: Open (Left) and Short (Right) Three-Pin Jumpers: Pins 1 and 2 are Short Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 22: Locations Of The Jumpers And Connectors
Locations of the Jumpers and Connectors The following figure shows the motherboard used in the NIFE 200S, and indicate the locations of the jumpers and connectors. Refer to this chapter for detailed pin settings and definitions of the connectors marked in pink on this figure. -
Page 23: Connector Pin Definitions
HDD_LED_PWR HDD_LED_N POWER_LED_PWR PWR_LED_N LED2 (COM1/COM2) COM2_RXLEDN COM2_RXLEDP COM2_TXLEDN COM2_TXLEDP LED2 LED1 (GPIO) COM1_RXLEDN COM1_RXLEDP COM1_TXLEDN COM1_TXLEDP GPIO3_LED GPO_PR3 GPIO2_LED GPO_PR2 LED1 GPIO1_LED GPO_PR1 GPIO0_LED GPO_PR0 Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 24: Dvi-I Connector
DP_DATA2_P_C DVI1_DATA1_N_C DVI1_DATA1_P_C DP_DATA2_N_C DP_DATA3_P_C DP_DATA3_N_C DVI1_PWR DPC_CONFIG1 DPC_CONFIG2 DVI1_HPD DPC_AUXP_C DVI1_DATA0_N_C DVI1_DATA0_P_C DPC_AUXN_C DP_HPD_R DDC_CLK_VGA_C N21809347 HDMI_PWR DDC_DATA_VGA_C DVI1_CLK_P_C DVI1_CLK_N_C RED_VGA GREEN_VGA BLUE_VGA HSYNC_VGA VGADET Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 25: Lan1 And Usb 3.0/Usb 2.0 Ports
P5V_OC01_C Flashing Yellow Data activity HUBUSB_DN4_C HUBUSB_DP4_C No activity LAN (CON1B) Definition Definition V1P5_LAN2 LAN2_MDI0P LAN2_MDI0N LAN2_MDI1P LAN2_MDI1N LAN2_MDI2P LAN2_MDI2N LAN2_MDI3P LAN2_MDI3N LAN2_ACT_CON LAN2_LED_ACT# LAN2_100#_CON LAN2_LINK1G# Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 26: Lan2 And Usb 2.0 Ports
10Mbps or no link DP2_C Status LAN (CON2B) Flashing Yellow Data activity Definition Definition No activity V1P5_LAN LAN1_MDI0P LAN1_MDI0N LAN1_MDI1P LAN1_MDI1N LAN1_MDI2P LAN1_MDI2N LAN1_MDI3P LAN1_MDI3N LAN1_LINK1G# LAN1_100#_CON LAN1_LED_ACT# LAN1_ACT_CON Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 27: Com 1/2 Port
Definition Definition SP1_DCD SP1_RXD SP1_TXD VIN_1 SP1_DTR ISO_GND SP1_DSR VIN_VSS SP1_RTS SP1_CTS SP1_RI H3_GND SP2_DCD SP2_RXD SP2_TXD SP2_DTR SP2_DSR SP2_RTS SP2_CTS SP2_RI CHASIS_GND CHASIS_GND CHASIS_GND CHASIS_GND Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 28: Internal Jumpers
Connector location: JP12 Definition Definition 3VSB AT/ATX_SEL RTC_TEST# ATXBT_R Definition Definition 1-2 On ATX mode (default) 1-2 On Normal (default) 2-3 On AT Mode 2-3 On Clear CMOS Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 29: Internal Connectors
Internal USB Dongle Connector Connector type: 1x2 2-pin header, 2.0mm pitch Connector type: USB port Connector location: BAT1 Connector location: CN1 Definition Definition USB_OC3 DN3_C VBAT DP3_C Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 30: Mini-Pcie Connector
Connector location: CN2 51 52 Definition Definition Definition Definition PCIE_WAKE# 3VSB_MINI1 1V5_1 SMB_CLK_CON PCIE_mSATA_TXN_R SMB_DATA_CON PCIE_CLKREQ3# PCIE_mSATA_TXP_R HUB_CLKN3_R HUB_CLKP3_R 3VSB_MINI1 3VSB_MINI1 MINICARD1DIS# PLTRST_3P3#_CON 1V5_1 PCIE_mSATA_RXP_R 3VSB_MINI1 PCIE_mSATA_RXN_R 3VSB_MINI1 Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 31: Mini-Pcie Connector
Definition Definition PCIE_WAKE# 3VSB_MINI2 SMB_CLK_CON PCIE_TXN2 SMB_DATA_CON PCIE_CLKREQ2# UIM_PWR PCIE_TXP2 UIM_DATA MINI2USBN PCIE_CLKN2 UIM_CLK MINI2USBP PCIE_CLKP2 UIM_RESET 3VSB_MINI2 UIM_VCCP 3VSB_MINI2 MINICARD2DIS# PLTRST_3P3#_CON PCIE_RN2 3VSB_MINI2 PCIE_RP2 3VSB Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 32: Sd Card Slot
Connector location: CN4 Connector type: 1x4 4-pin header, 2.0mm pitch Connector location: J1 Definition Definition Definition SD_D3 SD_CMD VCC12 SD_CLK SD_D0 SD_D1 VCC5 SD_D2 SD_WP SD_DET GND1 Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 33: Internal Com3 Connector
Connector location: J2 Connector location: J3 Definition Definition Definition Definition SP4_DCD SP4_RXD SP3_DCD SP3_RXD SP4_TXD SP4_DTR SP3_TXD SP3_DTR SP4_DSR SP3_DSR SP4_RTS SP4_CTS SP3_RTS SP3_CTS SP4_RI VCC12 SP3_RI VCC5 Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 34: Debug Card Connector
Connector type: 1x2 2-pin header, 2.0mm pitch Connector location: J4 Connector location: JP1 Definition Definition Definition PLTRST_3P3# PM_RESET#_J LPC_CLK0_DEBUG LPC_FRAME# LPC_AD3 LPC_AD2 LPC_AD1 LPC_AD0 VCC3 VCC3 Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 35: Power Connector
Connector type: 1x2 2-pin header, 3.96mm pitch Connector type: 2.0mm MALE 180° DIP Connector location: JP2 Connector location: JP4 Definition Definition FRONT_LCI VCC12 AGND EXLINEOUT_JD FRONT_RCI Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 36: Remote Push Button Connector
Connector type: 1x3 3-pin terminal block, 3.81mm pitch Connector type: 2x4 8-pin header, 1.27mm pitch Connector location: JP5 Connector location: JP6 Definition Definition Definition 5VSB 5VSB PBT_TR KDAT_R MDAT_R KCLK_R MCLK_R 3VSB Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 37: Internal Gpio Pin Header
Connector type: Standard Serial ATA 7P (1.27mm, SATA-M-180) Connector location: JP8 Connector location: SATA1 Definition Definition Definition Definition VCC5 S_TXP1 ICH_GPO0_OUT ICH_GPI0_IN S_TXN1 ICH_GPO1_OUT ICH_GPI1_IN S_RXN1 S_RXP1 ICH_GPO2_OUT ICH_GPI2_IN ICH_GPO3_OUT ICH_GPI3_IN Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 38: Chapter 3: System Setup
Installing a SO-DIMM Memory Module Place the NIFE 200S system on a flat surface to prepare for installation. Locate the four screws on the side of the chassis. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. - Page 39 Chapter 3: System Setup Remove the four screws and gently lift up the side cover. Locate the memory module sockets. Memory sockets Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
- Page 40 Chapter 3: System Setup Insert the memory module into the socket. Ensure the memory module is secured properly into the socket. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
-
Page 41: Installing A Mini-Pcie Module (Half-Size)
Secure the mini-PCIe module with the mini-PCIe bracket provided in the package. Locate the mini-PCIe slot on the board. Mini-PCIe slot Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... - Page 42 Insert the mini-PCIe module into the mini-PCIe slot at a 45 degree angle until the gold-plated connector on the edge of the module completely disappears into the slot, push the module down and secure it with screws. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
-
Page 43: Installing A Mini-Pcie Module (Full-Size)
Locate the mini-PCIe slot on the board and remove the mini-PCIe disappears into the slot, then secure the module with screws. bracket. Mini-PCIe slot Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 44: Installing An Interanl Sim Card
Place the SIM card into the holder and insert the SIM card holder back to its original position. Locate the SIM card socket on the board of NIFE 200S and press the yellow button gently to retrieve the SIM card holder. -
Page 45: Installing An Internal Micro Sd Card
Insert the Micro SD card into the socket until it clicks into place. Locate the Micro SD Card socket on the board of NIFE 200S. Micro SD card socket Reassemble the chassis by following the steps used to disassemble it, and screw it back in place. -
Page 46: Chapter 4: Bios Setup
This chapter describes how to use the BIOS setup program for the NIFE 200S The settings made in the setup program affect how the computer performs. . The BIOS screens provided in this chapter are for reference only and may It is important, therefore, first to try to understand all the setup options, and change if the BIOS is updated in the future. -
Page 47: Default Configuration
Powering on the computer and immediately pressing <Del> allows you to enter Setup. Load optimized default values. Press the key to enter Setup: Saves and exits the Setup program. Press <Enter> to enter the highlighted sub-menu Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... - Page 48 When “” appears on the left of a particular field, it indicates that a submenu which contains additional options are available for that field. To display the submenu, move the highlight to that field and press Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
-
Page 49: Bios Setup Utility
System Date [Thu 11/26/2015] F2: Previous Values System Time [13:15:49] F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 50: Advanced
Select the highest ACPI sleep state the system will enter when the suspend Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc. button is pressed. The options are Suspend Disabled and S3 (Suspend to RAM). Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... - Page 51 Display the Super I/O chip used on the board. Onboard Serial Port Mode Select this to change the serial port mode to RS232, RS422, RS485 or RS485 Auto. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
- Page 52 CPU Temperature Detect and display the current CPU temperature. System Temperature Detect and display the current system temperature. Fan Speed Detect and display the fan speed. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
- Page 53 Windows series operating systems. If you are using an operating system other than Windows, this problem may occur. To avoid this problem, enable this field to limit the return value to 3 or lesser than 3. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
- Page 54 F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc. EIST Enable or disable Intel ® SpeedStep. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
- Page 55 Enable or disable SATA port 0 and SATA port 1. SATA Port0 Hotplug and SATA Port1 Hotplug Enable or disable hotplug support on SATA port 0 and SATA port 1. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
- Page 56 Enable or disable onboard LAN PXE ROM. DDR50 Support for SDCard Storage Enable or disable DDR50 support for SD card. Control the execution of UEFI and legacy storage OpROM. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
-
Page 57: Chipset
This is a workaround for OSs that does not support XHCI hand-off and EHCI Hand-off. The XHCI and EHCI ownership change should be claimed by the XHCI and EHCI driver respectively. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... - Page 58 Enable or disable PCH USB rate matching hubs mode. Azalia HDMI Codec USB EHCI Debug Enable or disable internal HDMI codec for Azalia. Enable or disable PCH EHCI debug capability. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
-
Page 59: Security
Enable or disable the PCI Express ports 0 to 3 on the chipset. Select this to reconfigure the administrator’s password. User Password Select this to reconfigure the user’s password. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... -
Page 60: Boot
Adjust the boot sequence of the system. Boot Option #1 is the first boot dialog box will appear. Confirm by selecting Yes. device that the system will boot from, next will be #2 and so forth. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual... - Page 61 3. Measure the power consumption and record it. 4. Run Burn-in test program to apply 100% full loading. 5. Measure the power consumption and record it. Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
- Page 62 GPI/O (General Purpose Input/Output) pins are provided for custom system design. This appendix provides definitions and its default setting for the ten GPI/O pins in the NIFE 200S. The pin definition is shown in the following table: PowerOn PowerOn...
- Page 63 #define GPO1_LO outportb(0xA02, 0x00) #define GPO2_HI outportb(0xA07, GPO2) #define GPO2_LO outportb(0xA07, 0x00) #define GPO3_HI outportb(0xA07, GPO3) #define GPO3_LO outportb(0xA07, 0x00) void main(void) GPO0_HI; GPO1_LO; GPO2_HI; GPO3_LO; Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
- Page 64 WDT_SET); outportb(SUPERIO_PORT+1, 0x90); # Use the second # Use the minute, change value to 0x10 # Set WDT sec/min outportb(SUPERIO_PORT, WDT_VALUE); outportb(SUPERIO_PORT+1, 0x05); #Set 5 seconds Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved. NIFE 200S User Manual...
- Page 65 L PPendIx roGrammInG uIde LEDs are provided for custom system design. This appendix provides definitions and its default setting for the LEDs in the NIFE 200S. The LED definition is shown in the following table: PowerOn Address Default GPO-PR0...
Need help?
Do you have a question about the NIFE 200S and is the answer not in the manual?
Questions and answers