Chapter 4: System Setup; Opening The Enclosure - Nexcom nROK 1020 Series User Manual

Chapter 4: System Setup

C 4: s
haPter ystem

Opening the Enclosure

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION! is off and disconnected from the power sources to prevent
electric shock or system damage.
1. Remove the screws on the bottom of the enclosure.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
41
2. Remove the screw on the front panel.
3. Remove the screw on the rear panel.
VTC 1020 and nROK 1020 Series User Manual