Nexcom nROK 1020 Series User Manual page 82

Appendix E: Vehicle Power Management Setup
Enable Power-on Delay
Delay time can be set at 10sec/30sec/1min./5min./10min./15min./30min./1hour.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
Power Management Configuration
** Startup & Shutdown Voltage Setting **
Input Voltage
Startup,Shutdown [(11.5,10.5)/(23,21)]
** Delay Time Setting **
Power On Delay
[Disabled]
Power Off Delay [Disabled]
Disabled
Enabled
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Power On Delay Setting
12 V
Power On Delay
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
Power Management Configuration
** Startup & Shutdown Voltage Setting **
Input Voltage
Startup,Shutdown
** Delay Time Setting **
Power On Delay
Delay On Time selection
10 sec
30 sec
Power Off Delay
01 min
05 min
10 min
15 min
30 min
01 hour
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
65
Delay On Time selection
Setting
12 V
[(11.5,10.5)/(23,21)]
[Disabled]
Delay On Time selection
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
VTC 1020 and nROK 1020 Series User Manual