Nexcom nROK 1020 Series User Manual page 69

Vehicle telematics & railway computer

Table of Contents

Appendix A: Software Demo Utility for I/O Ports of Function Control

5.2 SMS and Phone Number

Configures the SMS content and phone numbers for delivering SMS message.

If SMS Control is enabled, once event is triggered (defined by Acceleration

Force & Tilt Angle), SMS Message will be sent to the phone numbers that

are registered automatically. There are up to 10 phone numbers that can be

registered. SMS Content can be defined inside the text field.

5.3 Tracker Settings

Configures settings for the tracker.

If Tracker function is "Enable" and Tracker Mode is "Event", once event is

triggered (defined by Acceleration Force & Tilt Angle), following information

will be sent to server.

If Tracker function is "Enable" and Tracker Mode is "Continue", following

information will be sent to server, based on the interval time defined in Send

Period.

VTC 1020 and nROK 1020 Series User Manual

Table of Contents

Need help?

Do you have a question about the nROK 1020 Series and is the answer not in the manual?