To Install Usb 2.0 Driver For Windows 2000 Or Xp; Raid Driver Installation - SOLTEK NF4-754RL Manual

SL-NF4-754RL

3-6 To Install USB 2.0 Driver for Windows 2000 or XP

USB V2.0 with its 480Mb/s transfer rate supports operating system
Windows 2000 and Windows XP via the Windows 2000 and Windows
XP Service Pack . Users should install the latest Service Pack for Win-
dows 2000 or Windows XP. Please note that USB2.0 does not support
windows 9X on nVidia mainboard.
1. After installation of nVIDIA nForce4 All in 1 Driver in Windows 2000
or Windows XP, start to install the latest Service Pack version into
the operating system. The installation of the latest Service Pack will
support USB2.0 in Windows 2000 or Windows XP now.(The latest
Service Pack can be found in Microsoft Web Site.)
2. To verify USB2.0 installation, please enter "Device Manager" of "My
Computer". On the "Device Manager" screen, you should be able to
see the item "Standard Enhanced PCI to USB Host Controller",
verifying USB2.0 Driver is installed successfully.

3-7 RAID Driver Installation

1. RAID Driver should be installed into a RAID system. That is, user
should first configure a RAID system and then install the RAID driver
into it.
2. Chapter 5 of this User Manual introduces the configuration of RAID
system and then the installation of RAID Driver. Please refer to
Chapter 5 for the RAID Driver installation.
Chapter 3 Software Setup
37