Audi Q7 2007 Repair Manual page 60

Audi Q7 2007 ➤
Fuel Supply System - Edition 10.2018
• Tab -2- on right locking flange faces toward arrow marking and
must lie between tabs -1 and 3- on fuel tank.
– Install locking flange cover.
– Insert the frame into the floor covering. Refer to the Parts Cat‐
alog and ⇒ Body Interior; Rep. Gr. 70 .
– Remove the seat frame and seat cushion in the second row.
Refer to ⇒ Body Interior; Rep. Gr. 72 .
– Be sure to follow the procedure for connecting the battery and
afterwards. Refer to ⇒ Electrical Equipment; Rep. Gr. 27 .
Vehicles with Auxiliary Heater:
– Allow to run 10 minutes at full throttle to bleed fuel supply line
to auxiliary heater metering pump.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
56
Rep. Gr.20 - Fuel Supply