Access The Built-In Web Interface; Required Ip Address Settings - HMS Networks Anybus Wireless Bolt LTE User Manual

® ™
Anybus Wireless Bolt LTE

5.3. Access the Built-In Web Interface

5.3.1. Required IP Address Settings

To be able to access the Bolt LTE built-in web interface you may need to adjust the IP settings, choose one of the
following methods.
NOTE
The Bolt LTE default IP address is 192.168.0.98 and the subnet mask is 255.255.255.0.
Option 1 - Enable DHCP on Your PC
When DHCP is enabled on the PC accessing the Bolt LTE, you do not need to change the IP address settings for
the Bolt LTE to be able to access the Bolt LTE built-in web interface.
Option 2 - Set a Static IP Address on Your PC
On the PC accessing the Bolt LTE built-in web interface, set a static IP address within the same IP address range as
the Bolt LTE IP address.
NOTE
When you change to a static IP address on your PC, internet access is lost.
Result
NOTE
The Bolt LTE comes with a default username and password. The default username is admin, written
in lowercase letters. You find the default password on the Bolt LTE product housing.
Now you can enter the Bolt LTE IP address in your web browser and search to access the built-in web interface
login page.
See Log In to the Built-In Web Interface (page
Page 14 of 60
15).
Access the Built-In Web Interface
SCM-1202-164 Version 1.2