Table of Contents
Advertisement
Communicator Configuration
7.3
Access the Built-In Web Interface From a Web Browser
Before You Begin
The Communicator default IP address is 192.168.0.10.
To access the Communicator built-in web interface, ensure that Port 80 TCP is open in your Firewall.
This applies to any Firewall between the web browser and the gateway.
When you change to a static IP address on your computer, internet access may be lost.
Procedure
1.
On the PC accessing the Communicator built-in web interface, set a static IP address within
the same IP address range as the Communicator IP address.
2.
Open a web browser.
3.
Click to select the Address bar and enter the Communicator IP address.
4.
To open the built-in web interface Home page, press Enter.
®
™
Anybus
Communicator
User Manual
34 (124)
SCM-1202-162 1.1 en-US
Advertisement
Table of Contents
