JRC JMR-92 Series Field Service Manual page 850

7.2.7 Checking the Magnetron Current Level of the
RADAR [Magnetron Curr.]
This function is used to check the magnetron current level of the radar.
This function is displayed only when the magnetron radar scanner unit is connected.
1.
Click on the [Menu] button on the left toolbar.
The menu is displayed.
2.
Click on the [Maintenance] - [Diagnosis] - [Magnetron Current] button on the menu.
The magnetron current level of the scanner unit is displayed.
7-27 Chapter 7 Troubleshooting