JRC JMR-92 Series Field Service Manual page 430

Step 2 Open the power supply/interface circuit unit (on the starboard side).
[Starboard side] By loosening the bolts (M4) and two screws (M4), the power supply/interface
circuit can be opened towards the front.
電源 I/F 回路部
Power supply / interface circuit
Ｍ4 ねじ
Remove the two
screws (M8)
（2 箇所）外す
Starboard side
Chapter 4 Replacement procedure
右舷側
4-210
M8 ボルト
Remove the
eight bolts
脱落防止
(M8)
（8 箇所）
Ｍ4 ボルト
Loosen the bolts
(M4)
緩める
Ｍ4 ねじ
Loosen the two
screws (M4)
（2 箇所）緩める