JRC JMR-92 Series Field Service Manual page 541

Be careful with the fan mounting direction. Be sure to install the fans so that the air flows out of
the the monitor.
Have enough clearance to prevent the cables from being caught in the blades of the fans.
After replacing the fans, assemble to the original condition by repeating the same procedure in
the reverse order. Please make sure to tighten all the screws and connect all the cables back in
place.
Step 3 Check operation.
After monitor fan replacement is completed, turn ON the circuit breaker for the power supply of
the display unit and check the operation as follows.
(3) Turn ON the power to the display unit and make sure that screen display is normal.
Adjust brightness and make sure that brightness changes.
(4) Check that the fan error " LCD (FAN #n)" does not occur.
(5) Referring to "7.2.2 Checking the Condition of the Screen [Monitor Test]," check the
screen display to make sure that there is no problem.
This completes monitor fan replacement.
Chapter 4 Replacement procedure
Fan
Connector Connector
4-320
Fan