JRC JMR-92 Series Field Service Manual page 577

Step 8 Change HASP and e-Token.
Replacement the HASP and the e-Token being connected to the upper base of Existing CCU
and insert them into the corresponding connectors on the upper base of New CCU. Then, fasten
them with cable-ties.
The color of the HASP is green. The color of the e-Token is blue with a JEPPESEN company tag
which is written the System ID.
Green
CYC-344 HASP
Be careful not mix up Existing one and New one.
Insert both the HASP and the e-Token securely all the way to the roots. When fastening them,
be sure to fasten securely so that there is no looseness.
Be aware not to insert the HASP and the e-Token into wrong connectors.
The appearance of e-Token and HASP may change without notice.
Chapter 4 Replacement procedure
Blue
CYC-735 e-Token
4-356