JRC JMR-92 Series Field Service Manual page 609

Step 4 Replace the HASP.
Disconnect and replace the HASP being connected to the upper base of the NDC-1590.
The color of HASP is green.
Be careful not to mistake HASP for e-Token. The color of the e-Token is blue with a
JEPPESEN company tag.
The appearance of HASP and e-Token may change without notice.
Since the HASP has been fixed by cable-ties, cut them before disconnecting it.
After replacement is completed, fasten the new HASP again with cable-ties.
Insert the HASP securely all the way to the roots. When fastening it, be sure to fasten
securely so that there is no looseness.
When the replacement of the HASP
procedure in the reverse order. For further information, see "Field Service Manual 4.3.3.2
Replacing with the CCU Repair Kit: NZC-1590".
Chapter 4 Replacement procedure
Green
CYC-344 HASP
CYC-344
HASP
CYC-735
e-Token
completed, assemble the CCU by repeating the same
is
4-388