JRC JMR-92 Series Field Service Manual page 796

6.2 Connection with VDR
6.2.1 Checking the Installation Status
The following two types of connection methods are available for connection with the voyage
data recorder (VDR).
1. Connection via LAN (IEC61162-450).
2. Connection through analog RGB
Please refer to Chapter 5 in the "JMR-92XX/72XX JAN-92XX/72XX Installation Manual" and
check the installation status with the VDR.
6.2.2 VDR Interface Kit
The VDR interface kit is used to connect the analog RGB signal to the VDR. For the details,
refer to Chapter 5 in the "JMR-92XX/72XX JAN-92XX/72XX Installation Manual".
VDR Interface Kit CQD-1891 Packing list:
DSUB15P – BNC cable (KB5BNC2K, 2 meters)
BNC to BNC adapter (BNC-A-JJ)
BNC connector (3CV-P2)
Use a 3C-2V coaxial cable for connection.
NDC-1590
J4205
RED
BNC
KB-5BNC2K
GRN
BNC
BLU
BNC
GRY
RED :red
BNC
GRN :green
BLU :blue BLK
GRY :HSYNC
BNC
BLK :VSYNC
CQD-1891
6-11
3CV-P2
BNC-A-JJ
3C-2V
BNC-A-JJ 3CV-P2
3C-2V
3CV-P2
BNC-A-JJ
3C-2V
BNC-A-JJ 3CV-P2
3C-2V
3CV-P2
BNC-A-JJ
3C-2V
Chapter 6 Connection to External Navigation Equipment
1 pc.
5 pc.
5 pc.
TO VDR