JRC JMR-92 Series Field Service Manual page 729

4.3.12.3 Detaching the front frame of the Display Unit mount kit
【 Required Tools 】
The tools shown in the following table are required for this work
No Name
1 Phillips screwdriver
2 Phillips stubby screwdriver
3
Diagonal pliers
4
Cable-tie *1
*1 A number of cable-ties may be required.
Do not lose the screws as they will be needed again
Do not detach the front frame except under unavoidable circumstances for the
sake of the ship's structure. It may lead to unexpected accidents.
To prevent damage to the Unit during the replacement work, cut off cable-ties that
fasten the cable of the unit beforehand.
Chapter 4 Replacement procedure
Table Required Tools
Size
Size #2
Size #2
－
－
4-508
Appearance