Names Of Display Units And Scanner Units - JRC JMA-7133-SA Instruction Manual

[3] Erasing a connection pattern (Erase)
Procedures
1) Open the Inter Switch Menu (with 3 or More Display Units).
2)
Left-click the
The File Operations window will appear.
3) Left-click the
The Erase menu will appear.
The list of connection patterns stored in the memory will be displayed.
4) Left-click the button corresponding to the file to be erased.
Confirmation Window will appear.
Left-click the
5)
The selected connection pattern is erased and the file name is deleted from the list.
A.2.6

Names of Display Units and Scanner Units

The display units and antenna units can be named.
Procedures
1) Open the Inter Switch Menu (with 3 or More Display Units).
2) Left-click the
"Name" will be highlighted, indicating that the rename mode is activated.
3) Move the cursor to the display unit
master" or Section c. "Display unit connected as slave")
"Connected scanner unit")
he Input IND Name or the Input TXRX Name window will appear.
4) Input a new unit name.
Up to 8 characters can be input as a unit name. For the input method on the character input
menu, see Section 3.3.4.7 "Entering a character".
The selected display unit or antenna unit will be renamed when the new name is input.
>
JMA-7100 Instruction Manual A.NQE-3141 Interswitch Unit
2. File Operation
3. Erase
to load.
1. Yes
button.
1. Name
to be renamed , and left-click.
A－ 9
>
A.2 INTERSWITCH OPERATION
button.
button.
(Section b. "Display unit connected as
or scanner unit
(Section a.
A