2.5
Connecting the Switch to Ethernet Ports
2.5.1
RJ45 Ethernet Cable Wiring
For RJ45 connectors, data-quality, twisted pair cabling (rated CAT5 or better) is rec-
ommended. The connector bodies on the RJ45 Ethernet ports are metallic and con-
nected to the GND terminal. For best performance, use shielded cabling. Shielded
cabling may be used to provide further protection.
Straight-thru Cable Wiring
Pin 1
Pin 2
Pin 3
Pin 6
Maximum cable length: 100 meters (328 ft.) for 10/100BaseT.
EKI-7720 Series User Manual
Cross-over Cable Wiring
Pin 1
Pin 1
Pin 2
Pin 2
Pin 3
Pin 3
Pin 6
Pin 6
Figure 2.12 Ethernet Plug & Connector Pin Position
Pin 3
Pin 6
Pin 1
Pin 2
8
1
15