Setting E-Mail Receiving (Web Page); Setting The Power Save Mode (Web Page) - Printronix LP654C User Manual

9
In [Method], select the required authentication method.
[Anonymous]: Selected to access the LDAP server using anonymous authentication.
[Simple]: Selected to access the LDAP server using simple authentication.
[Digest-MD5]: Selected to access the LDAP server using Digest-MD5 authentication.
[Secure Protocol]: Selected to access the LDAP server using Secure Protocol (Kerberos) authentication.
If [Anonymous] is selected, authentication will always be anonymous, even when the LDAP server is used for
LDAP name authentication. If the LDAP server is used for LDAP name authentication, select any authentication
method other than [Anonymous].
If [Digest-MD5] is selected, it is required to set the DNS server.
If [Secure Protocol] is selected, it is required to set the SNTP server, DNS server and secure protocol server.
10
If any option other than [Anonymous] is selected in Step 9, specify the user ID and password to
login to the LDAP server.
11
Select an encryption type in [Encryption].
[None]: No encryption will be done.
[LDAPS]: The encryption will be done with the LDAPS method.
[STARTTLS]: The encryption will be done with the StartTLS method.
12
Click [Submit].

Setting E-mail receiving (Web page)

Set the protocol (POP3, SMTP, etc.) for this machine to receive e-mails.
1
Open the web page of this machine.
Opening the web page
2
Log in as an administrator.
Logging in as an administrator
3
Select [Admin Setup].
4
Click [Network] - [Mail Server] in the left side of the screen.
5
Set the mail server if necessary.
6
Click [Submit].

Setting the power save mode (Web page)

Set the time that will elapse before the power save mode is entered.
1
Open the web page of this machine.
Opening the web page
2
Log in as an administrator.
Logging in as an administrator
3
Click [Admin Setup].
4
Click [Management] - [Power Setup].
5
Select the desired switchover time from [Power Save Time], and click [Submit].
- 219 -