Opening The Web Page Of A Registered Device; Automatically Following The Ip Address Of The Registered Device - Printronix LP654C User Manual

1
Start the Printronix LPR utility.
2
Select the machine to set.
3
Select [Confirm Connections] from the [Remote Print] menu.
4
Click [Detail Setup].
5
Check [Print to more than one printer at a time].
6
Click [Options].
7
Click [Add].
8
Input the IP address of the devices to print at the same time, and click [OK].
9
Click [OK].

Opening the web page of a registered device

You can open the web page of this machine from the Printronix LPR Utility.
1
Start the Printronix LPR Utility.
2
Select this machine.
3
Select [Web Setting] from the [Remote Print] menu.
 When the web port number is changed, the web page cannot be opened.
For details, see "Setting the port number of the web page for the registered device

Automatically following the IP address of the registered device

You can set to maintain the connection to the original device even if the IP address of this machine is
changed.
 Administrator privileges are required.
 The IP address may be changed when the IP address is dynamically allocated by DHCP, or when the network
administrator has manually changed the IP address of this machine.
- 283 -
".