Setting Bluetooth By Configuration Utility - Printronix M4L Administrator's Manual

Setting Bluetooth by Configuration Utility

Connect the printer and computer with a USB cable.
Note: The printer connects with the computer via USB to USB cable or USB to RS-232 cable
(option).
Turn the printer power on using the Power key
Open Configuration Utility and set interface (default setting is USB)
USB to USB cable
The default interface setting is USB
interface. If USB interface is
connected with printer, no other
settings need to be changed in the
interface field.
Select "Wireless" tab and click on "Built-in wireless module" item.
Enter the new BT Local Name or BT PIN Code in the editor.
Press "Set" button to set the new BT name or BT PIN code of the printer.
Press "Get" button to get back the settings. Make sure the Bluetooth module settings are set
properly
USB to RS-232 cable