Troubleshooting For This Machine And Paper; Troubleshooting For The Machine - Printronix LP654C User Manual

Table of Contents

Advertisement

Troubleshooting for this machine and paper

Troubleshooting for the machine

 Please check the following explanation and "Frequently Asked Questions (FAQs)" on the website or your
smartphone application.
 If the problem persists, contact your dealer.
Symptom
Nothing is displayed
The power cord is
even after the power is
disconnected.
turned on.
There is a power
failure.
It does not work.
The power cord is not
inserted firmly.
The power is not
turned on.
The power was turned
off by the Auto Power
Off function.
This machine is
frozen.
The LED lamp of the
This machine is
power switch is
broken.
flashing rapidly at
intervals of approx. 0.3
seconds.
The output tray does
The belt unit is not
not close.
inserted properly.
The image drum
basket is not inserted
to the end.
The front cover does
The image drum is not
not close. (The L1
installed.
lever dose not move.)
The error is not
The replaced
cleared even after the
consumables are not
toner or drum is
correct.
replaced.
The toner cartridge is
not installed properly.
Printing process does
An error is displayed.
not start.
Cause
Firmly insert the power cord.
Check the power transmission status to the
outlet.
Firmly insert the power cord.
Please turn the power on.
Please turn the power on. Or, disable the auto
power off function.
Press and hold the power switch for more than
5 seconds to force a shutdown.
Please remove the power cord immediately
and contact your dealer.
Install the belt unit again.
Insert the image drum basket to the end.
Insert the image drum by pulling the L2 lever
and opening the output tray.
Check the name and color of the consumables
that must be replaced by the error message on
the display. Replace the corresponding
consumables.
Check that the toner cartridge is installed
firmly.
Check the error code and follow the on-screen
instructions.
- 374 -
Solution
Reference
-
-
-
Turning the
power on
Turning off the
power
automatically
(Auto Power Off)
-
-
Replacing the
belt unit
Replacing the
image drum
Replacing the
image drum
Error message
list
Replacing the
black(K) toner
cartridge and the
waste toner box
Replacing the
toner cartridge
(C/M/Y)
Error message
list

Advertisement

Table of Contents
loading

Table of Contents