Printronix LPR Utility
With the Printronix LPR Utility, you can print via a network, manage print jobs, or check the state of this
machine.
To use the Printronix LPR Utility, TCP/IP must be enabled.
The Printronix LPR Utility cannot be used for shared printers. Please use the standard TCP/IP port.
Starting the Printronix LPR Utility
1
Click [Start], and select [Printronix] - [Printronix LPR Utility].
Registering this machine with the Printronix LPR utility
Add this machine to the Printronix LPR utility.
Administrator privileges are required.
If this machine cannot be added, exit the Printronix LPR utility, right-click on [Start] - [Printronix] - [Printronix LPR
Utility], and select [More] - [Running As Administrator] to restart the utility.
You cannot set a device that is already registered in the Printronix LPR Utility. To change the port, select [Confirm
Connections] from [Remote Print].
1
Start the Printronix LPR Utility.
2
Select [Add Printer] from the [Remote Print] menu.
When [User Account Control] screen is displayed, click [Yes].
3
Select [Printer Name].
Networked printers and printers connected to the LPR port will not be displayed.
4
Input [IP Address]. Or, click [Discovery], select the model name to be registered from
[Discovered Printer], and click [OK].
5
If necessary, input the information to identify this machine in [Comment].
6
Click [OK].
Checking the state of the registered machine
1
Start the Printronix LPR utility.
2
Select this machine.
3
Select [Printer Status] from the [Remote Print] menu.
- 281 -