By default, two types of roles are registered.
.AdminRole:
The role of the device administrator. It can be assigned to general users. A user with [.AdminRole]
assigned can act as a device administrator and perform [Administrator Login] on the web page.
(However, the condition is that access control is enabled and it is a local user.)
[.AdminRole] cannot be deleted or edited.
.DefaultRole:
This is the role to be assigned if no role is specified when a user is registered.
[.DefaultRole] cannot be deleted, but the access rights can be edited.
1
Open the web page of this machine.
Opening the web page
2
Log in as an administrator.
Logging in as an administrator
3
Click [User Management].
4
Click [Role List].
5
Click [Add].
6
When the Role Information screen is displayed, input the required information.
Role Name: Input any role name. The same [Role Name] cannot be registered. Also, [Role Name]
cannot be omitted.
Role Description: Input a description for the role.
Permission: Set permission/prohibition/forced prohibition of each operation in this role. Setting forced
prohibition will prohibit operations permitted by other roles.
Local User List: Add or delete a local user to which this role is assigned.
Kerberos User List: Add a Kerberos user to whom this role applies.
- 229 -