Printing in economy mode
This section describes how to save paper and toner on printing.
Printing on both sides of paper
You can print on both sides of paper.
For paper applicable to duplex printing, see "
Some applications may not be available.
For Windows PCL printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Select [Long Edge] or [Short Edge] from [2-Sided Printing] on the [Setup] tab.
5
Specify other settings as necessary, and click [OK].
6
Click [Print] in the [Print] screen.
For Windows PS printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Select [Flip on Long Edge] or [Flip on Short Edge] from [Print on Both Sides] in the [Layout] tab.
5
Specify other settings as necessary, and click [OK].
6
Click [Print] in the [Print] screen.
For macOS
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Select [Long-Edge blinding] or [Short-Edge blinding] from [Two-Sided] in the [Layout] panel.
4
Specify other settings as necessary, and click [Print].
If there is no detail settings displayed in the [Print] screen, click [Show Details] at the bottom of the screen.
Printing in the toner save mode
Print in the toner save mode.
The amount of toner to be saved can be set in 3 levels.
[Printer Setting]: Follows the device settings.
[OFF]: Prints at normal density without saving toner.
".
Applicable paper
- 165 -