Printronix LP654C User Manual page 125

Card Hold Buzzer Volume
Time Setup Date Format
Time Zone
Daylight Saving
Setting method
SNTP Server(Primary)
SNTP Server(Secondary)
Time Setting
Power Setup Auto Power Off
Tray Setup Unit of Measurement
Default Paper Size
Others Setup Paper Feed
Roller
Counter
Clear
Flash
Memory
Setup
Job Log
Setup
Security
Setup
Language
Setup
Item
MP Tray Clear
Tray1 Clear
Tray2 Clear
Tray3 Clear
Tray4 Clear
Initialize
Format Partition
Save Job Log
Clear Job Log
Access Control
User Counter Report
Select Language
Factory
default
settings
Low Sets the buzzer volume when the IC card is
held.
Displayed when access control is enabled.
yyyy/mm/dd Sets the date in the format of yyyy/mm/dd.
+9:00 Sets the GMT time zone.
Value range: -12:00 to +13:00 (in
increments of 15 minutes)
Off Sets the daylight saving (daylight saving
time).
Manual Selects how to set the time.
Setup
(Blank) Sets the SNTP server used to set the
current date and time. Up to 64 characters
(Blank)
can be used.
Displayed when [Auto Setup] is selected as
the setting method.
2001/01/01 The time is set at factory delivery. Change
00:00:00 the date and time if necessary.
Displayed when [Manual Setup] is selected
as the setting method.
Auto Config Sets the operation of Auto Power Off.
Auto Config: Auto Power Off does not work
for network (wired/wireless) connection.
Enable: Auto Power Off works regardless of
the connection method.
Disable: Auto Power Off does not work.
millimeter Sets the unit of measurement for the custom
size (mm/inch).
A4 Sets the default paper size of a custom size.
Execute Clears the counter after the paper feed roller
of the MP tray is replaced.
Execute Clears the counter after the paper feed roller
Tray 1 is replaced.
Execute Clears the counter after the paper feed roller
Tray 2 is replaced.
Execute Clears the counter after the paper feed roller
Tray 3 is replaced.
Execute Clears the counter after the paper feed roller
Tray 4 is replaced.
Execute Initializes the flash memory.
PCL Formats the specified partition of a flash
memory.
Disable Sets whether to save a log of print data.
Execute Clears the log of saved print data.
Displayed when [Save Job Log] is enabled.
Disable Sets whether to enable access control.
Execute Prints a user counter report. Displayed
when access control is set to [Enable] and
[Save Job Log] is enabled.
English Selects the display language of the display.
- 126 -
Description