Printronix LP654C User Manual page 356

Cause
Settings are not insufficient to
connect.
Network connection settings are
incorrect.
The settings of wireless LAN
(Infrastructure) are incorrect.
The settings of wireless LAN (AP
mode) are incorrect.
A timeout occurs during
connection.
For Windows
Cause
The IP address is incorrect.
The WSD port is in use.
Solution
To connect via the wireless LAN access point or the
wireless LAN router, set the wireless LAN (Infrastructure)
accordingly.
To connect a mobile device directly to this machine, set the
wireless LAN (AP mode) accordingly.
 Wireless LAN (Infrastructure) and Wireless LAN (AP
mode) cannot be enabled at the same time.
 To connect via a wireless LAN (Infrastructure), set
[Wireless(AP Mode)] to [Disable] and
[Wireless(Infrastructure)] to [Enable].
 To connect via a wireless LAN (AP mode), set
[Wireless(Infrastructure)] to [Disable] and
[Wireless(AP mode)] to [Enable].
If you are connected via a wireless LAN (Infrastructure),
check the infrastructure settings.
If you are connected via a wireless LAN (AP Mode), check
the AP mode settings.
Connect by specifying the wireless LAN access point you
want to use from the wireless LAN access points detected
by this machine.
Solution
 Make sure the IP address of this machine matches
the one set on the PC.
 Make sure the IP address does not overlap with that
of other devices.
 If [IP Address Set] is set to [Auto], the address may
change dynamically. If the setting changes frequently,
change [IP Address Set] of this machine to [Manual],
and match the IP address of this machine with the one
set on the PC.
 Make sure the configured IP address, subnet mask
and gateway address are all correct.
 For the Printronix LPR Utility, check the IP address
settings with the Printronix LPR Utility.
When the print port does not function well with "WSD",
specify the IP address or short printer name of this machine
in the standard CP/IP port, and add the print port.
- 357 -
Reference
Connecting via
an access point
(Infrastructure)
Connecting
directly with this
machine (AP
mode)
Connecting via a
wireless LAN
Connecting via
an access point
(Infrastructure)
Connecting
directly with this
machine (AP
mode)
Connecting by
selecting a
wireless LAN
access point from
the operator
panel
Reference
Printing the menu
map
(configuration)
Printronix LPR
Utility
-