Selecting A Rotor For Logging; Modifying Information In The Lab Rotors Log - Beckman Coulter Optima XL Series Instruction Manual

SELECTING A ROTOR FOR LOGGING

MODIFYING INFORMATION IN THE LAB ROTORS LOG

DELETING A ROTOR
6. Use the keypad to enter or modify the total number of hours that the rotor
has run (in this and any other ultracentrifuge). Press
You can use each OTHER entry only once. If you try to list it a second time,
an error message will indicate that this entry has already been selected.
✻✸✽✸✻❛
1. Press the hardkey.
✷✮❁✽❈✹✪✰✮❛
2. If necessary, press
keypad to select it by rotor number. The rotor line number and the rotor
model name will blink in the ROTOR field of the SETTINGS window.
✮✷✽✮✻❛
3. Press .
When the run ends, the instrument automatically updates the LAB ROTORS
log to include this run (total runs and hours). The ROTOR field in the SET-
TINGS window is cleared and NO ROTOR SELECTED is again displayed.
This feature allows you to modify certain information in the LAB ROTORS
log, including deleting a rotor and adding runs and hours to the log.
Delete a rotor from the LAB ROTORS log as follows.
✻✸✽✸✻❛
1. Press the hardkey. If necessary, press
the rotor.
✶✸✭✲✯❂❈✲✷✯✸❛
2. Press .
✭✮✵✮✽✮❈✻✸✽✸✻❛
3. Press
4. Use the keypad to select the rotor to be deleted and press
5. Respond to the prompt "Do you really wish to delete rotor no. x?" Press
❂✮✼❛
to delete the selected rotor; press
window without deleting the rotor.
to scroll to the rotor on the list, then use the
.
✷✸❛
to return to the LAB ROTORS
Rotor Functions
✮✷✽✮✻❛
.
✷✮❁✽❈✹✪✰✮❛¤
to scroll to
✮✷✽✮✻❛
.
4-5