Entering Run Parameters; Selecting A Rotor; Setting Run Speed - Beckman Coulter Avanti J-26S XP Instructions For Use Manual

Operation

Entering Run Parameters

Entering Run Parameters

Selecting a Rotor

1
Turn the
Small green LEDs by each rotor type abbreviation light one at a time, and the rotors of that type
appear consecutively in the display.

Setting Run Speed

Enter a run speed up to 26,000 RPM, or up to the maximum speed of the rotor in use. Or, enter a
relative centrifugal field (RCF) value up to the maximum achievable RCF of the rotor in use.
Setting RPM
1
Check to see if the red
a. If it is lit, go to step 3.
b. If the centrifuge is already in the
2
Press the
On the display, the red
2-4
knob until the rotor in use appears in the display.
ROTOR
light is lit on the display.
RPM
key to select the
RPM/RCF
LED lights.
RPM
ROTOR
JA
JS JLA
JSP JV
JE
JCF
is the default speed mode.)
(RPM
mode, skip step 2 and go on to step 3.
RPM
mode.
RPM
RPM
PN B10087AB