Selecting A Rotor; Entering Run Speed - Beckman Coulter Avanti J-25 Instruction Manual

SELECTING A ROTOR

Action
1. Press [ ].
ROTOR
2. Press the appropriate soft key
to select the rotor type.
To select a different rotor
type, press [ ] again
ROTOR
and then press another
soft key.
3. Select the rotor name by
pressing the appropriate
soft key. Press [
ENTER

ENTERING RUN SPEED

Result
The Rotor: field flashes, and rotor type abbreviation soft keys
(JA: fixed angle, JS: swinging bucket, JLA: lightweight fixed angle;
JV: vertical tube rotors; JE: elutriator rotors; JCF-Z: continuous flow/
zonal) appear.
A list of rotors of the selected type appears—fixed angle rotors are
displayed below. Press the MORE soft key to display additional fixed
angle rotor names.
Rotor : - -
Speed : 0
Time :
Temp : 25°C
Accel : MAX
The selected rotor name appears in the Rotor: field.
].
Rotor : JA-25.50
Speed : 0
Time :
Temp : 25°C
Accel : MAX
Enter a run speed up to the maximum speed of the rotor in use
(25 000 rpm maximum). Or, enter a relative centrifugal field (rcf)
value up to the maximum achievable rcf of the rotor.
RPM = 0 x G
00:00
Max Temp : 29°C
Decel : MAX
RPM = x G
00:00
Max Temp : 29°C
Decel : MAX
Operation
10
12
14
17
18
MORE
25.50
3-5