Beckman Coulter Optima XL Series Instruction Manual page 18

Introduction
Space
PHYSICAL DATA
xiv
Locate the Optima XL in a clean, safe, uncluttered environment. Be sure to
provide a 5.1-cm (2-in.) clearance on each side of the Optima XL as the feet
extend about 5.1 cm (2 in.) beyond the instrument. (The pads under each foot
are designed to prevent possible rotation of the instrument in the event of a
rotor mishap.) A 15.2-cm (6-in.) clearance is required at the rear of the instru-
ment for servicing and to ensure sufficient air ventilation during operation.
The instrument will operate within specifications in a laboratory with ambient
temperatures ranging from 15 to 40°C.
15.2
6
67.3
26.5
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 kg (1025 lb)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (overall) 120.7 cm (47.5 in.)
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.0 cm (37 in.)
Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67.3 cm (26.5 in.)
Clearances . . . . . . . . . . . . . . . . . . . . . . . 5.1 cm (2 in.) sides; 15.2 cm (6 in.) rear
Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . urethane paint on top surface;
Maximum heat dissipation into the room . . . . . . . . . . . . . 1.0 kW (3400 Btu/hr)
Humidity restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . <95% (non-condensing)
Noise level measured 0.91 m (3 ft) in front of the instrument . . . . . . . . . 57 dBa
Installation category. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II
Pollution degree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
94.0
37
cm
5.1
2 in.
general-purpose paint on other surfaces;
coated polycarbonate finish on control panel
5.1
2