Beckman Coulter Optima XL Series Instruction Manual page 49

Rotor Functions
SOFTKEYS
✷✮❁✽❈✹✪✰✮❛¤
✪✭✭❈✻✸✽✸✻❛
✼✱✸❀❈✼✹✮✬✼❛
✶✸✭✲✯❂❈✲✷✯✸❛
✻✸✽✸✻❈✬✪✽✪✵✸✰❛
✶✪✲✷❈✼✬✻✮✮✷❛
ADDING A ROTOR
4-2
A reverse video bar moves up and down the list to highlight the selected rotor.
The first line of the log, labeled 00 NO ROTOR LOGGING, is a permanent
entry. Select this entry when you do not want the rotor information logged to a
specific rotor.
✻✸✽✸✻❛
When you press the
the SETTINGS window blinks to indicate that you can enter a rotor selection.
The softkey labels that appear when the LAB ROTORS window is accessed
are listed below; these will change, as required by the particular rotor func-
tion. The softkeys have the following functions:
Displays the next page (screen) of lab rotors; each page lists 10 rotors.
Allows you to add a rotor to the list of lab rotors.
Displays specifications of the rotor selected for logging. (This softkey is not
available if no rotor is selected.)
Allows you to modify rotor information.
Allows you to access the list of Beckman Coulter rotors and rotor
specifications.
Returns you to the Main Screen.
Add a rotor to your LAB ROTORS log as follows:
1. While at the LAB ROTORS window, press the
2. Use the keypad to select a rotor line number (a number between 1 and 40)
to indicate where the rotor will appear in the log. (Each page shows ten
rotors.) The selected number will appear in the field just below the list.
✮✷✽✮✻❛
Press .
3. Use the arrow softkeys to highlight the name of the rotor to be added from
the ROTOR CATALOG window, which appears on the right side of the
screen (see Figure 4-1). Press
speed permitted automatically appear in the appropriate fields of the log.
hardkey, the ROTOR LOGGING field of
✪✭✭❈✻✸✽✸✻❛
✮✷✽✮✻❛
. The rotor model and maximum
softkey.