Selecting A Rotor - Beckman Coulter Optima MAX-XP Instructions For Use Manual

2
Select your user name, enter your PIN on the keypad, and press
• The Main screen returns to view.
• If you were required to log in, the run starts.

Selecting a Rotor

There are two reasons for selecting a rotor:
• To track rotor usage (rotor logging). If your Administrator has turned
must select a rotor prior to performing a run.
• To convert RPM to RCF. The ultracentrifuge needs to know the r
perform its calculations.
1
On the Main screen, press the
• The
a. If necessary, use the large arrows to bring additional rotor names into view.
NOTE
If you are starting a run without selecting a rotor and a message appears asking you to select a
rotor, press
NOTE
If
is selected and you want to remove it from your run parameters, select
another rotor.
393552AH
ROTOR
screen appears.
Choose Rotor
in the message box, then press the
OK
is highlighted in this list, it means that no rotor is currently selected. If a rotor
No Rotor Selected
button.
button.
ROTOR
Operation
Manual Operation
to accept.
OK
on, you
Rotor Logging
of the rotor on which to
max
, or select
No Rotor Selected
3
3-7