Manual Operation; Selecting A Rotor - Beckman Coulter Avanti J-E Instruction Manual

Action
5. Close the chamber door and
press [ ]. (To keep the
DOOR
chamber clean and dry, leave
the door closed whenever
possible.)

MANUAL OPERATION

SELECTING A ROTOR

Action
1. Press [ ].
ROTOR
2. Use the keypad to select a
rotor by entry code number.
3. Press the next run-parameter
key or press [ ].
ENTER
Result
The door latches. When the latches engage, the LED next to the
[ ] key lights.
DOOR
• When a run-parameter key ([
[ ], or [ ]) is pressed, a parameter can be entered or
ACCEL DECEL
changed. Entry is completed when [
key is pressed.
• To change an entry before you've pressed [
parameter key, press [
an entry after you've pressed [
key again.
• If an unacceptable value is entered, the valid range for that param-
eter is displayed in the message line. Enter the correct value.
Result
A list of rotors, with rotor entry codes, scrolls across the display.
➠
NOTE
An alternate method of selecting a rotor is to
press [
ROTOR
changes each time the key is pressed. When the
rotor you are using is displayed, press [
], [
ROTOR RPM/RCF
] or another function
ENTER
ENTER
] and enter a different value. To change
CE
], press the run-parameter
ENTER
] repeatedly; the rotor number
Operation
], [ ], [ ],
TIME TEMP
] or another
].
ENTER
3-5