UM11854
NXP Semiconductors
KITPF5030SKTEVM programming board
6.6.3.7 Main interrupts tab
The main interrupts tab shown in
Figure 42
allows the monitoring of the regulators, the wake inputs, and
the communication events or status. It allows the reading, writing, and polling of overvoltage/undervoltage,
overtemperature, and overcurrent flags.
Figure 42. Interrupts tab
Different commands can be used to manage the interrupts:
• Clear: Interrupt flags latched and selected are cleared
• Write: Masks an interruption when the mask is selected
• Read: Gives the status of all interrupts
• Poll: Reads interrupts values in a loop
Additionally, Clear All / Read All buttons are available to control all interrupts on one click.
UM11854
All information provided in this document is subject to legal disclaimers.
© 2023 NXP B.V. All rights reserved.
User manual
Rev. 1 — 9 March 2023
44 / 56