Table of Contents
Advertisement
NXP Semiconductors
Figure 24. OTP System Configuration tab, part 2 of 2: Power-up sequence diagram
6.3.2 Switching and LDO regulators tab
The switching and LDO Regulators tab shown in
• Block diagram: Summarizes the output voltage and startup slot of each regulator
• SMPSs configuration: Switching Mode Power Supplies configuration.
• LDOs configuration: Linear dropout regulators configuration
Figure 25. OTP SMPS and LDO regulators Configuration tab
6.3.3 Functional safety tab
The functional safety tab shown in
• System Safety Configuration: Watchdog, RSTB, PGOOD, safety path, SVS clamp
• Voltage Monitoring: Define the voltage monitoring configuration. Some protections have been implemented
to avoid OTP configuration issue.
UM11854
User manual
Figure 25
Figure 26
has several sections:
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 9 March 2023
KITPF5030SKTEVM programming board
has several sections:
UM11854
© 2023 NXP B.V. All rights reserved.
31 / 56
Advertisement
Table of Contents
