Table of Contents
Advertisement
NXP Semiconductors
4.4.1 Connectors
Figure 7
shows the location of connectors on the board.
Figure 7. Evaluation board connectors location
4.4.1.1 VIN connector (J1)
Table 2. VIN_5V and VIN_3V3 connector (J1)
Schematic label
J1-1
J1-2
J1-3
4.4.1.2 Output power supply connectors
Table 3. LDO1/2 connector (J5)
Schematic label
J5-1
J5-2
J5-3
UM11854
User manual
Signal name
VIN_5V
VIN_3V3
GND
Signal name
LDO2
LDO1
GND
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 9 March 2023
KITPF5030SKTEVM programming board
Description
5 V voltage supply input
3.3 V voltage supply input
Ground
Description
LDO2 regulator output
LDO1 regulator output
Ground
UM11854
© 2023 NXP B.V. All rights reserved.
13 / 56
Advertisement
Table of Contents
