Table of Contents
Advertisement
NXP Semiconductors
5.2 Installing NXP GUI software package
To install the "NXP GUI for Automotive PMIC Families" or obtain the NXP GUI package, unzip an open "1 -
NXP_GUI_Setup" folder as shown in
Figure 15. NXP_GUI_Setup folder
Then double click on the "NXP_GUI-version-Setup.exe" shown in
Figure 16. NXP_GUI_version_Setup.exe
To install the application on Windows PC, proceed with the pop-up windows shown in
Figure 17. NXP GUI setup 1/2
UM11854
User manual
Figure
15.
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 9 March 2023
KITPF5030SKTEVM programming board
Figure 16
and follow the instructions.
Figure 17
UM11854
and
Figure
18.
© 2023 NXP B.V. All rights reserved.
25 / 56
Advertisement
Table of Contents
