Table of Contents
Advertisement
UM11854
NXP Semiconductors
KITPF5030SKTEVM programming board
6.6.1.3 Script generator
The script editor allows the user to save script sequence files, as shown in
Figure
32. However, a script
sequence file is already saved as an example in the script generator. This script is used to release FS0B when
the PF5030 is using simple watchdog.
Figure 32. Script generator
6.6.2 Mirrors tab
Test mode must be applied to enable the Mirrors tab. This tab is divided in main and fail-safe mirrors registers,
shown in
Figure 33
and
Figure
34, respectively.
The "Read All" / "Write All" buttons can be used to read/write all the mirror registers. The mirrors configuration
content can be exported and imported in the OTP tool as OTP configuration to generate TBB/OTP script files.
UM11854
All information provided in this document is subject to legal disclaimers.
© 2023 NXP B.V. All rights reserved.
User manual
Rev. 1 — 9 March 2023
37 / 56
Advertisement
Table of Contents
