NXP Semiconductors
Figure 38. Watchdog tab
6.6.3.4 Diagnostic Safety tab
The diagnostic safety tab shown in
safety function events, like voltage monitoring flags, analog and logical BIST status, and safety pins are
automatically reported in this tab. The PF5030 can also get out of OTP or Debug mode using this tab.
Figure 39. Diagnostic safety tab
6.6.3.5 Main tab
Main configuration is possible from the main tab shown in
configuration of the clock modulation. A regulator can be assigned to a voltage monitoring using the VMON
assignment box, leading to a shutdown if OV occurs on the associated regulator.
UM11854
User manual
Figure 39
makes it possible to know the safety status of the device. The
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 9 March 2023
KITPF5030SKTEVM programming board
Figure
40. The clock management box allows the
UM11854
© 2023 NXP B.V. All rights reserved.
42 / 56