NXP Semiconductors
Figure 30. Script editor Help window
6.6.1.2 Management commands
Some commands are used for formatting the scripts.
Figure 31. Script editor commands
• Run: Runs the script once.
• Loop: Runs the script continuously in a loop.
• Save: Save the script that is present in the script command window in text file.
• Open: Open a saved script from the desired location.
• ATE: Saves the script in ATE format.
• Clear: Clears the script command window.
• Script Editor Help Window: Describes the commands available in script editor and their formats.
UM11854
User manual
Figure 31
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 9 March 2023
KITPF5030SKTEVM programming board
shows the description of each button.
UM11854
© 2023 NXP B.V. All rights reserved.
36 / 56