UM11854
NXP Semiconductors
KITPF5030SKTEVM programming board
6.6.3.8 Fail-safe interrupts tab
The fail-safe interrupts tab shown in
Figure 43
allows the monitoring of the overvoltage/undervoltage fail-safe
monitoring status and the watchdog. It allows the reading, writing, and polling of overvoltage/undervoltage flags.
Figure 43. Fail-safe interrupts tab
The same set of commands is used as the set to manage the interrupts as main interrupts.
UM11854
All information provided in this document is subject to legal disclaimers.
© 2023 NXP B.V. All rights reserved.
User manual
Rev. 1 — 9 March 2023
45 / 56