Table of Contents
Advertisement
UM11854
NXP Semiconductors
KITPF5030SKTEVM programming board
6.6.3.9 AMUX
The AMUX tab shown in
Figure 44
allows the selection of an AMUX pin channel and gets its current value
by using the exclusive KL25Z AMUX ADC channel. You can do a single read or display various channels
dynamically on the voltage or temperature graph. The displayed values already apply the divider and
temperature formulas.
The input / output voltage rails are also monitored independently using additional the KL25Z ADC channels.
To use the dynamic graph, select the channel then click the "+" button to add to the graph. To start polling, click
the "Poll" button. Click the "Poll" button again to stop measurements.
Figure 44. AMUX measurements
UM11854
All information provided in this document is subject to legal disclaimers.
© 2023 NXP B.V. All rights reserved.
User manual
Rev. 1 — 9 March 2023
46 / 56
Advertisement
Table of Contents
