Table of Contents
Advertisement
NXP Semiconductors
6.4.6 Working with the script editor
Table 14. Syntax for script editor commands
Command
Parameter 1
SET_REG
device name
GET_REG
device name
SET_DPIN
device name
[1]
PAUSE
message text
//
comment text
[1]
The PAUSE command should not be used when the auto-repeat option (∞) has been selected.
UM11758
User manual
Selecting tab 'Script editor' opens a tool for creating, executing, loading and saving
command sequences ('scripts') used for reading from or writing to registers. RGB LED
settings (see
Section
Figure 36. Script editor window
The commands available for the UJA1169Ax-EVB are listed in
need to be separated with a colon . Commands can be typed directly into the
'Commands' window, or constructed step by step using the selector tools in the left
column. A script can also be loaded from a file.
Once a script is complete, it can be saved to a file and/or executed once by clicking on
the corresponding button ( and/or⏵). Help text is displayed when the mouse pointer is
hovered above these buttons.
Script execution is logged in the 'Results' window.
If the infinity option (∞) is selected when the script is executed, it runs continuously in
a loop. The⏵button changes to ✋ when a script is running. Execution continues until
halted by clicking the ✋ icon. The ∞ option should not be used when the script includes a
PAUSE command. If this happens by accident, it may be necessary to abort the FlexGUI
application with the help of Windows Task Manager.
Parameter 2
register group
register group
MCU pin name
n/a
n/a
All information provided in this document is subject to legal disclaimers.
6.4.4) can also be included in such scripts.
Parameter 3
register name
register name
pin value
n/a
n/a
Rev. 1 — 19 April 2022
UM11758
UJA1169A evaluation boards
Table
14. Parameters
Parameter 4
Purpose
value
write to a register
n/a
read from a register
n/a
control RGB LED
n/a
wait for user
n/a
comment
© NXP B.V. 2022. All rights reserved.
34 / 39
Advertisement
Table of Contents
